RoHA Project is an IoT based Sensor Node that analyze a persons respiratory health and report its status on device and web application.
Tracking your movements can save your life.
The project is to provide a wearable monitoring system for sewage workers to monitor them while working in the sewage.
A health monitoring system for rural people of Bangladesh
A glucometer to estimate the blood glucose data accurately using Near-Infrared (NIR) Spectroscopy in a non-invasive manner.
Flash floods are very difficult to monitor in low lying areas due to their unpredictable nature.
Setting up a simple crowdsensing web app with edge and cloud model computing.
Third part of my IoT project. This time the station is a program running on a ST B-L072Z-LRWAN1 board that sends the sensors data using LoRa
Example on how to use AWS to setup an MQTT broker to reply messages sent from an environmental station to a web dashboard.
Second part of my IoT project. This time the environmental station is a program for RiotOS, the operating system for IoT devices.
A complete solution to check flues (and eventually every other enviroment in which there gas pipes) and send data to several endpoints.
A home security application, providing surveillance of the front door and the kitchen.
This project will show you how to program and connect your Soracom Wio LTE to AWS IoT using the Soracom Beam service and an Arduino Sketch
A simulation of secured locked rooms with the use of cloud services and Internet of Things.
This Alexa-controlled device aims to save water by planning the time and amount of water to use in each shower.
This is a school IoT project which utilises 3 Raspberry PIs and other cloud services such as CloudantDB, Amazon S3, and Amazon IoT (MQTT)
This project creates a Walabot consumables monitoring system accessible via Alexa ecosystem used by businesses and households alike.
The phone will ring if you have an alert in your AWS Cloudwatch. If you pick up the handset, it tells you what's wrong.
We are developing the remote control and sensing platform to connect scientific laboratory equipment to the cloud.
This is an Alexa-enabled (voice) drink maker powered by a Raspberry Pi and AWS IoT.
Amazon released an AWS IoT button but made it really difficult to get a hold of. Why not build your own and customize it to your liking.