A cloud-based IoT system that collects virtual sensors data from RIOT-OS nodes, using MQTT-SN and MQTT protocols, and AWS IoT Core.

RIOT-OS application sending virtual sensors' values to AWS IoT through an MQTT-SN/MQTT transparent bridge.

Setup an IoT MQTT cloud based system, including sensors, a database and a website using Amazon Web Service (AWS)

Example on how to use AWS to setup an MQTT broker to reply messages sent from an environmental station to a web dashboard.

Second part of my IoT project. This time the environmental station is a program for RiotOS running on the emulated "native" board.

Web application that monitors virtual sensors' values using AWS IoT and DynamoDB.

A cloud-based IoT system that collects information from a set of virtual environmental sensors using the MQTT protocol and AWS IoT Core.

Know when to eat food before it expires.

This Alexa-controlled device aims to save water by planning the time and amount of water to use in each shower.

A complete solution to check flues (and eventually every other enviroment in which there gas pipes) and send data to several endpoints.

WEAR is an open source low cost smart wearable device to ensure safety of women by giving the caregivers security alerts.

A home security application, providing surveillance of the front door and the kitchen.

From secure LoRaWAN node based on Trusted Objects-Avnet TO136 SE to AWS IoT, using STM32 Nucleo board, Kerlink gateway & Actility servers.

Learn how to easily connect your device to AWS IoT MQTT broker using balenaCloud with this step-by-step guide.

Ever forgot to lock your front door or to take your house keys? MEmento is here to help with a smart notifications system.

A system that can be used by users that allows them to view the available parking spaces through a website in huge parking lots.

AWS IoT Core integration, with open tools.

Bringing efficiency to space utilization at most end-user location convenience.

Send flow rate measurements to the cloud and monitor them in real-time with Soracom Harvest and AWS IoT.

A model of home security system that utilized sensors and internet to monitor the security status in real-time.

A Soracom GNSS tracker with motion detection, data visualization, and rule-based alerts.

This project will show you how to program and connect your Soracom Wio LTE to AWS IoT using the Soracom Beam service and an Arduino Sketch

First steps with SIM7600X-H and how to connect it to Amazon Web Services using MQTT and AT commands.

Using Alexa and Arduino to instil a sense of Hygge upon your arrival home. Fully functioning Alexa controlled smart bath.