Cloud-based home alarm IoT system using a Hall effect sensor and two magnets fixed to a door to detect intrusions and to trigger an alarm.

The autonomous dispenser of food and water for dogs, with an analysis of the consumption during the time, supports the medical diagnosis.

Connect the Thing and AWS with MQTT Bridge. Use Rules, DynamoDB and Lambda to manage the data. Make a site with Api Gateway and Amplify.

Implementation of fire detection system, using Esp32 with RIOT, building a cloud infrastructure with MQTT and AWS, and creating a website.

This guide details how to configure and test a FreeRTOS example to connect to AWS IoT

AI powered robo car with gripper arm for elderly and people with disabilities

This project incorporates VR and AR to bring an immersive classroom experience to students who cannot attend a class in a physical setting.

Getting started guide for connecting an Avnet MaaXBoard 8M SBC to AWS IoT Core.

Getting started guide for connecting an Avnet MaaXBoard 8ULP SBC to AWS IoT Core.

A remote-driving intelligent robot car based on IoT oneM2M techniques

This project uses oneM2M and ESP32 to create a smart traffic light system using cellular based IoT with the Nordic Thingy:91

Sustainable platform of sensing and irrigation automation based around the Nordic's Thingy: 53 with predictive analysis.

Learn how to build a "jump scare" skeleton that is remotely triggered using the Blues Wireless Notecard (without a host MCU!).

Sustainable platform of sensing and irrigation automation based around the SenseCAP K1100 with predictive analysis via the Helium Network.

Use the Sony Spresense with camera board and LTE board to detect potholes and then notify via MQTT the GPS location!

Detection and monitoring with AWS free parking spaces through the Sony Spresense board and pre-trained ML models thanks to Edge Impulse.

Controlling LED ON and OFF condition remotely connected to WizFi360-EVB-Pico using AWS IOT.

AEye can be able to detect when your stove has been left unattended using Wio Terminal and thermal camera.

An AWS IoT Tutorial With LinkIt ONE

An IoT Logging and Fire detector employing the PSoC™ 6 62S2 Wi-Fi BT Pioneer Kit by Infineon and the Helium Network via LoRa.

System that monitors a tap with the goal to detect wheter there is a leak of water and in case of leak notify it through an acoustic signal.

See how the IoT can benefit the aviation industry by syncing and visualizing flight logs with OpenSync and the Blues Wireless Notecard.

This post is a tutorial to receive MQTT Message from W5100S-EVB-Pico and store it in DynamoDB.

Complete IoT and domotics platform that tracks the patient’s sleep via three main devices, displays the data and gives recommendations.