RoHA Project is an IoT based Sensor Node that analyze a persons respiratory health and report its status on device and web application.
Tracking your movements can save your life.
Think for a moment about your favorite place, it should be your home, right? Have you ever wondered what happens when you're not there? Zabo
This project will show you how to program and connect your Soracom Wio LTE to AWS IoT using the Soracom Beam service and an Arduino Sketch
A health monitoring system for rural people of Bangladesh
The project is to provide a wearable monitoring system for sewage workers to monitor them while working in the sewage.
A glucometer to estimate the blood glucose data accurately using Near-Infrared (NIR) Spectroscopy in a non-invasive manner.
Flash floods are very difficult to monitor in low lying areas due to their unpredictable nature.
Saving lives of vulnerable who are prone to accidents by sending emergency message to the best by hospital by sharing the location.
Using a garbage truck-mounted camera and machine learning algorithms to detect waste sorting and encourage people to do better.
Setting up a simple crowdsensing web app with edge and cloud model computing.
Third part of my IoT project. This time the station is a program running on a ST B-L072Z-LRWAN1 board that sends the sensors data using LoRa
Second part of my IoT project. This time the environmental station is a program for RiotOS, the operating system for IoT devices.
Example on how to use AWS to setup an MQTT broker to reply messages sent from an environmental station to a web dashboard.
RIOT LoRaWAN sensors, communicating through The Things Network in an IoT cloud based system for real time data.
How to run up an IoT MQTT cloud based system, including sensors, database and a website, in a short time.
This Alexa-controlled device aims to save water by planning the time and amount of water to use in each shower.
A complete solution to check flues (and eventually every other enviroment in which there gas pipes) and send data to several endpoints.
A home security application, providing surveillance of the front door and the kitchen.
A simulation of secured locked rooms with the use of cloud services and Internet of Things.
"You just say what the thing does and then you add '-er'." Replenisher keeps your fridge, office...stocked! Just scan! "I'm going on break!"
Making your toiletries smart, automatically reorder them when they are under 1/4 of the weight.
Blind people have a big problem: they can’t see. Blindsight simulates a novel sense of sight with haptic feedback vibration motors and ML.
This is a school IoT project which utilises 3 Raspberry PIs and other cloud services such as CloudantDB, Amazon S3, and Amazon IoT (MQTT)