Havenesh BalakrishnanBrandon Yap
Published © GPL3+

Libace - The Smart Library Reservation Application

Ever wished for a library where you could reserve that one spot? Or even have the power to control reservations? Imagine that with Libace.

AdvancedFull instructions providedOver 2 days1,002
Libace - The Smart Library Reservation Application

Things used in this project

Hardware components

Raspberry Pi 3 Model B
Raspberry Pi 3 Model B
×2
Adafruit T-Cobbler GPIO Extension Board
Not compulsory.
×2
Breadboard (generic)
Breadboard (generic)
×2
DHT11 Temperature & Humidity Sensor (4 pins)
DHT11 Temperature & Humidity Sensor (4 pins)
×1
Resistor 10k ohm
Resistor 10k ohm
×2
LED (generic)
LED (generic)
2 Red and 2 Green are needed.
×4
Resistor 330 ohm
Resistor 330 ohm
×5
Buzzer
Buzzer
×1
MFRC522 NFC RFID Card Reader
×1
Pushbutton switch 12mm
SparkFun Pushbutton switch 12mm
×1
Standard LCD - 16x2 White on Blue
Adafruit Standard LCD - 16x2 White on Blue
×1
Male/Male Jumper Wires
×22
Male/Female Jumper Wires
Male/Female Jumper Wires
×11
NFC-Embedded Card
×1

Software apps and online services

MQTT
MQTT
AWS IoT
Amazon Web Services AWS IoT
AWS SNS
Amazon Web Services AWS SNS
Telegram

Story

Read more

Schematics

Fritzing Diagram for User

Fritzing Diagram for Admin

Code

Source Code for Libace

Credits

Havenesh Balakrishnan

Havenesh Balakrishnan

1 project • 0 followers
Brandon Yap

Brandon Yap

1 project • 0 followers

Comments

Add projectSign up / Login